DESST 2518 - Construction II

North Terrace Campus - Semester 1 - 2024

In this course students will study the construction of architecture, landscapes and urban environments. The course will build on the topics introduced in Construction 1: history and theory; representation and documentation; materials and detailing; construction and design; and engineering structure and fabric. The topics of: plants and planting; irrigation; grading; civil structural principles; and digital construction documentation will be introduced in this course. AutoCAD and REVIT will primarily be used.

  • General Course Information
    Course Details
    Course Code DESST 2518
    Course Construction II
    Coordinating Unit Architecture and Landscape Architecture
    Term Semester 1
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 3 hours per week
    Available for Study Abroad and Exchange Y
    Assumed Knowledge DESST 1507 or a 3 unit Level I course
    Restrictions Available to B. ArchDes, B.E(Arch), B.ConsMgmt, B. ConsMgmt(Hons) and Assoc. Deg.ConsMgmt students only
    Quota A quota will apply
    Assessment Quizzes, physical model making, digital models, hand drawing & digital drawing
    Course Staff

    Course Coordinator: Dr Armin Mehdipour

    ehsan.sharifi@adelaide.edu.au
    Room 468, Level 4, Barr Smith South, School of Architecture and Built Environment
    Tel: 08 8313 0317

    Ehsan will be joined by a team of architects, landscape architects, civil and structural engineers, and project managers to deliver Construction II.
    Course Timetable

    The full timetable of all activities for this course can be accessed from Course Planner.

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course, students will be able to:

    1. Recognise different types of structural systems and materials used in architecture and landscape construction (deep discipline knowledge).
    2. Apply knowledge of contemporary architecture and landscape construction (disciplinary knowledge).
    3. Demonstrate application of structures and service systems integration in the preparation of construction drawings/documentation (interdisciplinary knowledge - teamwork - professional communication skills).
    4. Demonstrate critical design thinking through consideration of assembly and the process of construction in a design for a mixed-use building and landscape (critical thinking - self-awareness and emotional intelligence).
    5. Apply CAD software to prepare construction drawings/documentation according to professional conventions (career readiness).
    6. Apply knowledge of National Construction Code (NCC) and Australian Building Code in architectural design (career and leadership readiness - intercultural and ethical competency - self-awareness and emotional intelligence).

    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.

    1, 2, 3

    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    3, 4

    Attribute 3: Teamwork and communication skills

    Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.

    3, 4

    Attribute 4: Professionalism and leadership readiness

    Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.

    1, 2, 3, 4, 5, 6

    Attribute 5: Intercultural and ethical competency

    Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.

    1, 3, 6

    Attribute 6: Australian Aboriginal and Torres Strait Islander cultural competency

    Graduates have an understanding of, and respect for, Australian Aboriginal and Torres Strait Islander values, culture and knowledge.

    .

    Attribute 7: Digital capabilities

    Graduates are well prepared for living, learning and working in a digital society.

    .

    Attribute 8: Self-awareness and emotional intelligence

    Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.

    1, 2, 3, 4, 6
  • Learning Resources
    Required Resources

    Course Textbooks

    Barry's Advanced Construction of Buildings (3rd Edition)
    Stephen Emmitt; Christopher A. Gorse
    Publisher: Wiley, 2014
    ISBN: 978-1-118-25549-0
    The book is available as an e-book from UofA Library: https://ebookcentral.proquest.com/lib/adelaide/detail.action?docID=1662690

    Site engineering for landscape architects
    Steven Strom, Kurt Nathan, Jake Woland. (6th ed.). Hoboken, N.J.
    Publisher: John Wiley & Sons, 2013
    ISBN: 1-118-41909-X
    The book is available as an e-book from UofA Library. https://ebookcentral.proquest.com/lib/adelaide/detail.action?docID=1115640

    Construction for Landscape Architecture
    Robert Holden and Jamie Liversedge
    Publisher: Laurence King, 2011
    ISBN: 9781856697088, 1856697088
    The book is available as an e-book at: https://ebookcentral.proquest.com/lib/adelaide/detail.action?docID=1876100

    Designing Interior Architecture: Concept, Typology, Material, Construction
    Sylvia Leydecker (eds)
    Publisher: Walter de Gruyter GmbH, 2013
    ISBN: 9783034615808
    The book is available as an e-book from UofA Library: https://ebookcentral.proquest.com/lib/adelaide/detail.action?docID=1075527

    Construction Project Management (6th edition)
    Keoki Sears, Glenn Sears, Richard Clough, Jerard ROunds, Robert Segner 
    Publisher: John Wiley & Sons, 2015
    ISBN: 9781118745250
    The book is available as an e-book from UofA Library: https://ebookcentral.proquest.com/lib/adelaide/detail.action?docID=1895571

    Recommended Resources

    Academic Support:
    Consult “The Writing Centre” for on-line resources re: essay writing guides, study guides, referencing. http://www.adelaide.edu.au/writingcentre/. Face-to-Face writing support is also available from Hub Central, Level 3. The Writing Centre provides academic learning and language support and resources for local, international, undergraduate and postgraduate coursework students enrolled at the University of Adelaide.

    The Writing Centre offers practical advice and strategies for students to master reading, writing, note-taking, and referencing techniques for success at university. Please note, the drop-in service is not an editing or grammar checking service but theCentre can help you develop your written English.

    No appointment is necessary. For greater assistance, please bring your course guide, assignment question, comments from your lecturers/tutors, and drafts of your writing.

    Speaker Series
    The School has a fortnightly lecture series where respected practitioners and academics from the field  deliver a public lecture on contemporary practice in architecture and  landscape architecture. In order to expand your knowledge of  contemporary directions in design it is recommended that you attend  these sessions. The exact detail of dates and speakers is available from the School website and the Front Office.

    Online Learning

    All course information including references, required texts, copies of assignments handouts and provisional marks will be available on MyUni. The discussion board on myuni can be used to communicate with other students and staff in relation to questions and issue that arise within the course.

    University Email:
    The school uses the University email system to get in touch with the students. So it is imperative that you check your email regularly and keep up to date with any new announcements.

    Noticeboard / Handbook:
    General information about the activities at the School is available online from the Student Noticeboard which can be accessed at https://unified.adelaide.edu.au/group/professons-student-architecture/current-student. Students can also access a copy of the Student Handbook available on the School's website.

    MyUni / Canvas
    In addition to the above resources, further assignment resources are  available on MyUni / Canvas. These may include further reading material  for the lectures and studios, reading material that will assist with the preparation of assignments and appropriate links to assist students  with academic writing including essay writing as required. MyUni / Canvas is an essential online tool which will be used to communicate  information regarding the course including details of assignments and  interim grades. There are many other learning resources and assessment  pieces that rely on the MyUni system for delivery.

    Therefore it is  recommended that you familiarise yourself with the various functions of  MyUni and employ it to its fullest extent. https://myuni.adelaide.edu.au

    Lecture Recording

    In certain cases the recording of the lectures is made available in  electronic format for students to listen through on their own time and  make notes, and is provided through Canvas. However, this service may not include guest lectures. Furthermore, where the presentation content  is subject to copyright or the guest speaker is uncomfortable with the  recording of the content, the lecture recording will not be made  available online. So students should not rely solely on this mode of  learning and arrange to attend or get lecture content from peers.

  • Learning & Teaching Activities
    Learning & Teaching Modes

    The schedule of teaching and learning modes can be viewed on Course Planner.
    Full details of individual lectures, required reading material and preparation for specific classes will be available on MyUni.

    Week1)    Introduction to CON II - REVIT intro 
    Week2)    Grading and WSD - REVIT Essential - Quiz
    Week3)    REVIT Designer - Certificate

    REVIT assignments due

    Week5)    Designing for Construction - Quiz
    Week5)    Structural Systems - Quiz
    Week6)    Planning documentation tuning 

    Assignment 2 due @A3

    Week7)    Working Drawing Standards - Quiz
    Week8)    Detailing-part A - Quiz
    Week9)    Detailing-part B - Quiz
    Week10)  Landscape construction Retaining Plants and Deck Quiz
    Week11)  NCC and Compliance - Quiz 
    Week12)  Interior detailing and services - Quiz

    Week13)  Assignment 3 due @A1 (Arch) / @A3 (ConMgnt

    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    The University expects full-time students (ie. those taking 12 units per semester) to devote at least 48 hours per week to their studies. Accordingly, students undertaking this 3 unit course are expected to devote 12 hours per week to contact activities and self-guided studies.

    Based on this framework here are some figures that might assist workload management:

    Total workload hours: 12 Hrs per week x 13 weeks = 156 Hrs
    Total contact hours: 3 Hrs per week x 12 weeks = 36 Hrs
    Total self-guided study: 156 Hrs – 36 Hrs = 120 Hrs

    These 120 hours should be used towards preparation of weekly tasks and for completion of the various assignments associated with the course, including development of various skills required to complete the same. Please organise your time wisely.

    Learning Activities Summary

    Full details of the learning activities will be available on MyUni/Canvas in O'Week.

    Schedule for Construction II
    Week Staff Lecture Workshop/Tutorial Submission
    1 ES, WW, RN Introduction to Con II REVIT intro

    2 ES, WW, RN Designing for Construction Orientation, form, and function 
    3 ES REVIT Essential module REVIT Designer module REVIT E&D certificate - CAD assignment due
    4 ES, WW, RN Soil and Foundation Foundation design and site grading
    5 ES, WW, RN, AV Structural Systems Structural design
    6 ES

    Grand Design  Planning documentation
    Assignment 2 due
    7 ES, JG, RR, WW, RN Working Drawing Standards  Learning from precedents 
    8 ES, JG, RR, WW, RN


    Detailing-part A

    Floor and roof details
    9 ES, JG, RR, WW, RN

    Detailing-part B

    Wall and cladding details 
    10 ES, JG, RR, WW, RN

    landscape Detailing Landscape details 
    11 ES, JG, RR, WW, RN

    NCC and compliance 

    Compliance notes 

    12 ES, JG, RR, WW, RN

    AU construction Standards 

    Internal elevations and materials schedule
    13 Assignment 3 due
    Specific Course Requirements
    Specific course requirements will be available on MyUni in O'Week.

    STUDENT RESPONSIBILITIES
    Please respect the facilities throughout the University.

    In the School of Architecture and Built Environment students are required to fabricate models, projects and other hands-on creative activities. Of course, you will make a mess in the process! No problem! Please clean up after yourself. If the materials are recyclable and you don't want to reuse them yourself, put them in the recycling bins. Don't leave paper/cardboard/offcuts on the floor or table, put them in the bin. Don't leave broken blades etc. on tables, put them in a sharps bin. Don't leave work (models, drawings etc) in a space (tutorial room, computer lab, studio) and expect to find it when you come back. The facilities are shared. The School recommends that you store your work in a locker available from ASA or in Hub Central.

    The tables in the learning and teaching spaces (tutorial rooms, computer labs, studios) are NOT cutting mats. Would you use an exacto knife or a scalpel to cut model making materials directly on your dining table at home? No? Don't do it at the University. Use a cutting mat. If you don't have one, buy one. All students should have a cutting mat in their Equipment Kit. You are expected to bring this with you if you are model-making, using glue etc.

    Students are permitted to bring food and drink into the learning and teaching spaces. Please respect your peers. When you have finished your bottle of water, coffee cup, bubble tea, Coke, juice, Boost, Red Bull etc. etc. put it in the bin. Don't leave your takeaway meal festering on a table cultivating mould. Put it in the bin.

    The importance of hygiene and cleanliness is amplified during COVID 19. Respect your peers. Respect your facilities. Please clean up after yourself at all times. This is your responsibility.

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Task/Assignment No. & NameDue DateWeightTypeLearning Outcomes
    REVIT assignment 1  Week 3 10% summative 3, 5, 6
    Assignment 2(group) - planning drawings, structure and model  Week 6 30%  summative  1-5
    Assignment 3 - working drawings, details and compliance   Week 13 40% summative 1-6
    Weekly quizzes  every Monday 8pm 20% summative 1-6
    Some students are enrolled in different Program pathways due to mid-year entry or otherwise. This may lead to a clash of due dates for assignments. If you have any concerns about the due dates, or conflicts arising with those of other courses, these concerns must be communicated to the course coordinator by Monday of Week 2.

    All lectures and tutorials are being recorded and available to all students on ECHO360. 

    All assignments are modified with a flexible mode of delivery to suit all students in and off-campus.
    Assessment Related Requirements

    For assignments submitted in tutorials it is a requirement that students pin up and present their work. Feedback will be verbal feedback in the tutorial session. Students are advised to ask one of their peers to make notes of the feedback for later reference.

    Assessment Detail

    Marking & Feedback (General)

    • Final results for the course will only be available through Access Adelaide and students should not contact the course coordinator or the tutors for the same.
    • Feedback for in-class submissions will only be available during the tutorial as oral critique in the style of studio wall-crits. Students should arrange with peers to make notes for reference.
    CAD-REVIT assignment 1:
    Students are to go to https://academy.archistar.ai/loginLinks to an external site. and register a free account with their University of Adelaide email (this will give you free access to all the contents).
    Find the link "do you have a free membership through your University, Company or School" click on the link and continue to register for free.
    Go to
    Complete the and courses.
    You can download project files and watch the tutorials or if you are confident about your AUTODESK REVIT skills go straight to the .
    Take , then download the completion certificate PDF file (should be above 80% to pass) and submit it to MyUni.


    Assignment 2:
    Early documentation drawings, structure and model
    This is a group (max 3) submission but can be done individually if desired
    (individual submissions of students who are remote/isolated do not require the physical model).
    Layout: approximately 12x A3 landscape + physical model
    Concept drawings of a mixed-use building including schematic site, floor plans and section will be provided to all students at the beginning of CON II.
    These can be accessed in the Concept drawings module
    We will use the rules provided in Building parameters for CON II to develop the provided concept drawings into early documentation and then later to full working drawings.
    Assignment requirements:
    Drawings (early documentation stage):
    - Site plan (1:200) including contours, ground floor level, simplified floor/roof plan, driveway, existing trees, eave/balcony lines overs, North point, scale bar and basic dimensions (building volume, distance to boundaries and site dimensions)
    - Basement, Ground and First floor plans (1:100) with a clear indication of wall types (i.e. masonry/studwork), structural grids, room tags, floor levels, indicative floor finishes including hatches where appropriate (i.e. decks, tiled rooms), plumbing fixtures (i.e. sinks, baths, showers, toilets - do not design the kitchen! just show basic layout and where fixtures are), window and door locations and approx. sizes, eave/balcony lines over, structural columns, section markers, North point, scale bar and basic dimensions (two layers)
    - Basic roof plan (1:100) including roof forms, pitch and direction of fall, roof materials, grid, North point and scale bar
    - 2x sections (1:100) including floor levels, a clear indication of structure type for each floor plane and roof profile, ceiling lines, structural grid (taken in two different directions through a salient part of the building)
    - 4x elevations (1:100) including floor levels, window/door opening locations, an indication of material types (stone, brick, timber cladding and etc.).
    Note: in architectural building, Sections are significantly more important than elevations. It is strongly recommended to produce your sections first and then generate elevations.
    - Basement slab plan (1:100) including slab extent, slab level, edge and internal footing locations, set downs, dashed wall lines above, structural grids, basic dimensions (to grid ok) , North point and scale bar
    - Ground slab plan (1:100) including slab extent, any supporting wall/ beam locations below, set downs (if any), structural grids, basic dimensions (to grid ok), balcony framing if lightweight, North point and scale bar
    - First floor framing plan (1:100) including columns/posts, load-bearing walls/studwork, beam and joist layout indication of what type each member is (i.e. material, profile, approx. size - does not need to be 100% correct! e.g. SHS100/5), structural grids, basic dimensions (to grid ok), any balcony framing, masonry walls extending from lower levels, bracing, North point and scale bar
    - Roof framing plan (1:100) including columns/posts, load-bearing walls/studwork, beam, rafter, truss, lintel, purlins layout. indication of what type each member is (i.e. material, profile, approx. size), structural grids, basic dimensions (to grid ok), balcony framing, masonry walls extending from lower levels, North point and scale bar
    - Note at this point it is not expected that you are accurate on sizing of structural components, but you should demonstrate a good understanding of what the structure is in any given part of your building and how the loads transfer down to the ground footings. You should demonstrate a clear understanding of what direction each member is spanning, what that element is called and the material/ profile it is constructed of. Likewise, you do not need to know exactly how these components are connected, but should be starting to form a sense of how they will eventually.
    Format: PDF printout + REVIT file

    Structural model (1:50):
    The structural model should have a realistic foundation, beams, columns and bracing but not non-structural elements such as non-load bearing walls, windows and doors.
    No interior/external wall/roof is needed (just the load-bearing structural elements and footing).
    Materials in use: Cardboard + Straw!
    Assessment criteria for the structural model:
    The structure should be able to hold the load of 10kg without collapsing for 30 seconds - will be tested by a 10kg water container on top of the structure during the tutorial session.
    Structures that pass the load test will be graded based on: (1) quality of built and (2) being lightweight (grade A: 200-300g; grade B:300-500g; grade C: 500-700g; Grade D over 700g)
    Include two photos of your structure on the cover page and/or the end of the assignment 1 submission.
    Remote students will make the model at home and prepare a 10kg weight (can be a bag of rice, 10-litre water container). Their models will be tested in front of the screen during their zoom session.


    Assignment 3
    (for Architecture and Engineering)
    Working drawings and details
    This is an individual submission.
    This is a hurdle assignment - you need to get a passing grade (min 20 points) in this assignment to pass CON II.
    Layout: A1 Landscape
    Building parameters for CON II
    No more than 50% of each fadade can be covered by a single material (each facade needs to include at least two different materials).
    The drawings and details for Assignment 3 are to be produced by the students based on their Assignment 2 drawings during tutorials W7-W12.

    Assignment requirements:
    Working drawings:
    - Site plan (1:100) including contours, ground floor level, floor/roof plan, driveway, landscape materials, proposed trees, eave/balcony lines overs, North point, scale bar and basic dimensions (two layers)
    - Basement, Ground and First Floor plans (1:50) with a clear indication of wall types (i.e. masonry/ studwork), structural grids, room tags, floor levels, floor finishes including hatches where appropriate (i.e. decks, tiled rooms), plumbing fixtures (i.e. sinks, baths, showers, toilets), main cabinet locations for kitchen, bathroom vanities, window and door locations, opening type, and sizes, eave/balcony lines over, structural columns, section markers, North point, scale bar and basic dimensions (two-three layers in each side)
    - Roof plan (1:50) including roof forms, pitch and direction of fall, eave and or box gutter locations, downpipes, roof materials, grid, near-building landscape/water storage/features, North point and scale bar
    - All floor plans should include provision for services and finishing materials and comply with SA Planning rules and NCC 2022.
    - The Ground Floor needs to comply with AS2890.1 (off-street parking).
    - The Basement needs to have a bathroom and comply with AS1428.1 (design for access and mobility).
    - 4x sections (1:50) including floor levels, a clear indication of structure type for each floor plane, a clear indication of structure type and roof profile for the roof, ceiling lines, structural grid (taken in areas linked to details - at least one cut through the staircase and one cut the building main entry).
    - 4x elevations (1:50) including floor levels, window/ door opening locations, and finishing materials.
    - 10x Construction Details (1:10). The location and view of these details need to be discussed with CON II tutor(s). They need to be linked to sections/plans by detail call-outs. These details may include:
    - Architectural details (1:10): basement/ground floor slab+wall, first-floor slab+wall, roof+wall, stairs+floor, window/door+wall, external cladding, connection of lightweight and masonry walls, wet areas
    - Landscape details (1:10): Retaining wall, external deck/alfresco/pool + security railing and boundary fense.
    Internal elevation(s) [section] and floor plan of the kitchen area of the residential part (1:20) with two layers of (minor-major) dimension on each side
    - Windows and doors schedule and legend with drawings, sizes and types (1:20 with dimensions)
    - Compliance notes (PlanSA, NCC, AS) on all applicable drawings.

    File format: REVIT file + PDF (merge all sheets in one single PDF file)

    Assignment 3
    (for Construction management)
    This is an individual submission.
    This is a hurdle assignment - you need to get a passing grade (min 20 points) in this assignment to pass CON II.
    Layout: A3 Landscape
    Building parameters for CON II
    The construction report for Assignment 3 is to be produced by the students based on their Assignment 2 drawings during tutorials W7-W12.
    Assignment requirements:
    Construction scoping:
    Students will prepare a scoping document of all tasks required for the construction of their element(s)
    Students will be assigned construction element(s) by the tutors including the construction of:
    - external facade, doors and windows
    - roofing and stormwater
    - kitchen and wardrobes
    - wet areas (bathrooms and laundry)

    Construction planning:
    The total construction time is estimated to be 12 months.
    Students will fit their project scope within the general schedule for the project (Gantt Chart)

    Material inventory and estimate:
    Students will research potential materials suitable for the construction of their element(s) and prepare a material inventory table
    Students will measure the amount of materials required for their element and nominate local providers for the required materials

    Compliance assessment:
    Students will evaluate their planning documents (assignment 2) to comply with (PlanSA, NCC, AS 1428.1, AS 1735.12, AS 2890.1), and document necessary changes to satisfy the compliance.

    File format: REVIT file + PDF (merge all sheets in one single PDF file)

    Submission

    Submissions (General):

    • All submissions must include Student Name and Student ID Number. Submissions without Student Name or ID Number will not be considered for marking, and will receive zero marks in accordance with the guidelines.

    • In addition, all assigments need to have an Assignment Cover Sheet which must be signed and dated by the student before submission. Please attach the cover sheet in front of the document, to the top left hand corner.

    • Please adhere to submission deadlines and follow instructions provided.

    • Students must not submit work for an assignment that has previously been submitted for this course or any other course without prior approval from the Course Coordinator.

    • On occasion, the lecturer/tutor may wish to retain students’ work for future reference and the relevant student will be informed at such a time.

    Early Submission:

    • There is an early submission box located on Level 4 which is cleared out daily at 10am. Please mark your submission clearly before placing in box.

    • Models for in-class presentation cannot be handed in early.

    Late Submission:

    • The school will NOT accept late submissions and any such assignment will receive zero marks. This also applies to electronic submissions.

    • Printing delays & hard disk crashes will not be entertained as legitimate causes for delay, so please ensure that the work is finished in advance.

    Re-submission:

    • The school has a resubmission policy whereby students can redeem failed work by submitting additional work for a maximum of 50%.

    • Note the date for the deadline for all re-submissions in the Student Handbook 2019.

    Good practice:

    • Students should ensure that they regularly backup their work on multiple locations as hard-disk crashes are an unfortunate reality.

    • When relying on community printing facilities, students should attempt to finish their work in advance to avoid unnecessary delays.

    • Students must retain a copy of all assignments submitted (digital or hardcopy), as originals may be lost during the submission process.

    For modified arrangements of submission and assessment due to special circumstances see the following Assessment Task Extension(s) & Additional Assessment guidelines.

    Modified Arrangements (General) 

    • Students can apply for extensions or modified arrangements based on Medical conditions or other Extenuating circumstances. However, students need to submit their application along with supporting documents within 5 business days of the condition becoming applicable.
    • The application forms are available from the Front Office and at http://www.adelaide.edu.au/student/exams/mod_arrange.html and need to be submitted at the Front Office along with any supporting documentation.
    • Please note that submitting an application does not guarantee acceptance and the Course Coordinator will inform the applicant if the application is accepted. Please DO NOT contact the Course Coordinator directly.

    Medical Reasons:

    • In case of an extended medical condition which makes it impossible for the student to submit the work on time, an Application for Assessment Task Extension due to Medical Circumstances may be lodged with the Front Office along with a doctor’s certificate within 5 business days.

    Extenuating Circumstances:

    • If the student is unable to submit the work on time due to extenuating circumstances an Application for Assessment Task Extension due to Extenuating Circumstances may be lodged with the Front Office.
    • Please note that this is only available for certain military, religious, or legal obligations and does not extend to minor personal problems. (Refer to Student Handbook at http://www.architecture.adelaide.edu.au/current/resources/ for further details or contact Student Advisor).

    Compassionate Grounds:

    • In case of certain extraordinary personal problems students can apply for extensions based on compassionate grounds. However, these must first be discussed with the Course Coordinator in person through appointment during the assigned office hours.
    • To maintain privacy relating to personal issues students can contact the University Transition and Advisory Service at 8313 0100 or transition@adelaide.edu.au, or approach the Counselling Service on 83035663 for an individual appointment.

    Additional Assessment:

    • If a student receives a Fail grade for the course with an overall mark between 45 and 49, they may be eligible for an Additional Assessment which would allow them to get a maximum of 50 Pass for the Course.
    • Additional Assessment offers are made by the School and the student will be informed directly once these are made available.

    Disability:

    • Students who have a disability and wish to seek modified submission or assessment arrangements need to contact the University Disability Services at 83135962 or disability@adelaide.edu.au for supporting documentation and then communicate these to the Course Coordinator in person through appointment during the assigned office hours.

    Elite Athlete:

    • Students who have national/international sporting commitments and wish to seek modified submission or assessment arrangements need to register with the University Elite Athlete Support Scheme at http://www.adelaide.edu.au/eliteathletes/ and then communicate this to the Course Coordinator in person through appointment during the assigned office hours.
    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through Access Adelaide.

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
    Course Support Staff:

    For issues concerning enrolment or queries about the School’s programs contact Clement Low, Student Advisor, 8313 5877, clement.low@adelaide.edu.au.

    For issues related to discrimination or harassment contact the Course Coordinator or Velice Wennan, School Manager, 8313 5475, velice.wennan@adelaide.edu.au.

    For issues relating to health, safety and wellbeing contact Ian Florance, Health, Safety and Wellbeing Officer, 8313 5978, ian.florance@adelaide.edu.au.

    For issues relating to first aid contact Alison Bosnakis, First Aid Officer, 8313 5836, alison.bosnakis@adelaide.edu.au
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student’s disciplinary procedures.

The University of Adelaide is committed to regular reviews of the courses and programs it offers to students. The University of Adelaide therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.